Jellystat

Version 1.1.4 · plug-in API >=1.14 <2.0

PublishedHow to add it
On this page

Jellystat: Install

Add Jellystat from Starboard's Catalogue, where it is listed under Apps you can add. Starboard shows what it may do and tests it before anything is added. At the end, Jellystat is active, with its own page on your home network.

Before you begin

  • Starboard with plug-in API 1.14 or later. An older Starboard is offered an earlier version: read Updates.
  • Jellyfin added to Starboard, in Settings, then Apps. Starboard gives Jellystat your Jellyfin's address and key, so you do not enter them.
  • Your Starboard password. Adding and removing a plug-in ask for it.

What it may do

Starboard lists these before you add it, each with its risk.

Permission Risk
Use Jellyfin's API key, kept by Starboard (jellyfin:key) High
Reach other computers on your home network, and the internet (network:lan) Medium
Open its own web page on your home network, at a port Starboard chooses (network:port) Medium

What it runs:

  • main: reaches only Starboard, on its own network: it cannot reach your home network or the internet. It can use its own folder in Starboard's data (data/plugins/jellystat).
  • app: reaches your home network and the internet, and this computer as host.docker.internal. It can use its own folder in Starboard's data (data/plugins/jellystat). Its web page is on your home network at port 3000 when that port is free, or the next free one.
  • db: reaches only Starboard, on its own network: it cannot reach your home network or the internet. It can use its own folder in Starboard's data (data/plugins/jellystat).

Like every plug-in, it runs read only, as a user that is not root, with no extra rights. Its image is pinned by digest, so what you approved is what runs.

Memory and processor

  • main: 64 MB of memory and 0.25 of a processor core at most.
  • app: 320 MB of memory and 0.5 of a processor core at most, and 128 processes.
  • db: 256 MB of memory and 0.5 of a processor core at most, and 128 processes.

Measured:

  • 126.4 MiB at rest as Starboard runs it, with an empty library: main 14.2 MiB, app 75.3 MiB and db 36.9 MiB (13 November 2026).

Add it

  1. Go to Settings, then Plug-ins, then Catalogue.
  2. Under Apps you can add, find Jellystat and select Install….
  3. A slide-out opens with what it can read, change and reach. Read it all.
  4. Enter your Starboard password and select Install Jellystat. To stop, select Cancel: nothing is installed.
  5. Jellystat's own tab opens under Settings, then Plug-ins. Select Activate. Its state changes to Active.

Add it by its address

On the Catalogue page, under Add one from elsewhere, paste this into The plug-in's manifest address, then select What it does and carry on from step 3:

https://raw.githubusercontent.com/TheMightyTRex/starboard-plugins/main/jellystat/starboard-plugin.json

Or run its installer, install.py in its folder, on any computer with Python, and give your Starboard's address.

Set it up

  1. Wait for its Jellystat card or tab to say "Jellystat is connected to Jellyfin." or "Gave Jellystat your Jellyfin's address and key."
  2. On Jellystat's tab, select Open. Jellystat's own page opens, at its address on your home network.
  3. Make Jellystat's own account. The first account is its admin. Anyone on your home network can open that page, so do this straight away.
  4. Optional: bring in the figures from a Jellystat you had before. Read Settings.

Remove it

  1. Go to Settings, then Plug-ins, then Jellystat.
  2. Under Remove, select Remove Jellystat.
  3. Choose where its folder goes: Keep it with Starboard's data (in data/plugins/.removed) or Move it to the holding folder, listed in System, Clean up, where you can put it back or delete it for good.
  4. Enter your Starboard password and select Remove.

Its containers stop and go, and its API key stops working. Nothing is deleted.

To stop it for a while instead, select Deactivate on its tab: its settings and folder are kept.

Find out more

This page on GitHub, where the help is written.