On this page
Troubleshooting
A pool disk has failed
When a disk in the pool fails, the pool still works, but the files on that disk are missing. Here is what to do first and how to get the files back.
The chart in words
Start: A pool disk shows Not mounted or Failing
- Then: Do these first (Pause downloads, keep the disk, check its cable)
- Then: Is the disk back after a restart?
- Yes: Check your disks' health (Another article)
- No: Which backup do you have?
- A parity disk: 1. Rebuild it from the parity disk
- A copy disk: 2. Copy the files back
- Neither: 3. Only that disk's files are lost
- Then: Is the disk back after a restart?
What happens
- On System, Storage, Pool, the disk shows Not mounted.
- On System, Storage, Disk health, the disk shows Failing or Needs attention, or is not listed.
- Apps report films or episodes as missing.
What to do first
- Stop the apps from searching for the missing files again: pause your download apps, or stop Reelix, until the disk is back.
- Do not erase or format the failed disk.
- Check the cable and the power to the disk, then restart the computer. A loose cable is a common cause.
1 With a parity disk
Fit a new disk at least as big as the failed one, and follow the SnapRAID manual's steps to recover a failed disk
(snapraid fix). Starboard does not do this step for you yet. Files added since the last nightly check cannot be
rebuilt.
2 With a copy disk
Copy the missing folders back from the copy disk, which is a plain readable copy.
3 With neither
Only the files on the failed disk are lost; the rest of the pool is fine. A data recovery service may be able to read the disk.
Afterwards
- Take the failed disk out of the pool once its files are back. Read Take a disk out of the pool.
- If you have no backup disk, add one. Read Use a disk as a backup disk.
Find out more
This page on GitHub, where the help is written.