On this page
How-to
Prepare a Raspberry Pi
Raspberry Pi Imager writes Raspberry Pi OS onto a microSD card and sets it up so that you can reach the Pi from your own computer, with no screen or keyboard on the Pi. At the end, the Pi starts on your home network, ready for Connect to your server from another computer.
Before you begin
- A microSD card of 32 GB or more, and a computer with a card reader. Everything on the card is erased.
- The name and password of your Wi-Fi, unless the Pi will use a network cable.
- A Pi big enough for a media server. Read Raspberry Pi and other small devices.
Steps
- On your computer, download and install Raspberry Pi Imager from Raspberry Pi's software page.
- Put the microSD card in your computer and open Raspberry Pi Imager.
- For the device, choose your Raspberry Pi model.
- For the operating system, choose Raspberry Pi OS (64-bit). On a Pi 3 or Zero 2 W you can choose Raspberry Pi OS Lite (64-bit) from Raspberry Pi OS (other): it has no desktop, which leaves more memory for your apps.
- For the storage, choose your microSD card. Check it is the card, not another disk.
- When Imager asks whether to apply OS customisation settings, choose Edit settings.
- Fill in the settings:
- Hostname: a short name for the Pi, such as
starboard-pi. You use it to find the Pi later. - Username and password: the account you sign in to the Pi with. Write the password down somewhere safe. - Wireless LAN: your Wi-Fi name and password, and your country. Leave it empty if you use a cable. - On the Services tab, activate Enable SSH and choose Use password authentication. - Save the settings, choose Yes to apply them, and confirm that the card may be erased.
- When Imager says it has finished, take the card out, put it in the Pi and connect the power.
The Pi takes a few minutes to start the first time. It is ready when its green light stops flashing. Next, follow Start Starboard on Raspberry Pi OS.
Things to note
- Imager's labels change between versions. If a label here is not on your copy, choose the same things in order: the device, the system, the card, then the customisation settings.
- A network cable is more reliable than Wi-Fi for a server, and faster for media.
Find out more
This page on GitHub, where the help is written.