On this page

Reference

Basics, Full install and Everything: what each one has

Install apps offers three installs. This page lists what each one does, its apps, and the computer and accounts it needs. You can change from one to another later, either way: read Change your install.

At a glance

Basics Full install Everything
Who it is for Most homes: a complete media server that stays light A household that wants watch statistics, logs and smaller files Someone who wants every app Starboard offers
Apps 7 10 17
Memory when idle about 0.6 to 1.6 GB about 1.1 to 2.6 GB about 1.9 to 3.4 GB
Memory at load about 1.2 to 2.3 GB about 2.6 to 4.1 GB about 3.7 to 4.9 GB
Processor when idle under 5% of one core under 10% of one core under 10% of one core
Processor at load 1 to 2 cores in bursts 2 cores, or every core while Tdarr converts 2 cores, or every core while Tdarr converts
Disk for the apps about 3.5 GB about 9 GB about 16 GB
Smallest computer 2 cores, 2 GB 4 cores, 6 GB 4 cores, 8 GB
Recommended computer 4 cores, 4 GB, or a Raspberry Pi 5 with 4 GB 4 cores, 8 GB, ideally with an Intel processor 4 or more cores, 8 GB or more

The figures include Starboard (about 25 MB) and Docker (about 80 MB). They are for the computer described in Memory and processor. The lower figure is for a small library and the higher one for a large library, mostly because of Jellyfin. Converting video needs much more processor.

Memory and processor

The computer these figures are for: an AMD Ryzen 5 1600 (6 cores, 12 threads, 3.2 GHz, from 2017) with 16 GB of memory and an NVIDIA GeForce GT 710, which cannot convert video, so the processor does all video work. "Core" means one of its 12 threads. A Raspberry Pi 5 core does about half as much, so double the processor figures there. A recent Intel processor does about the same or more, and converts video with its own hardware.

Idle, or at rest, means nothing is downloading, scanning or playing. At load, or while working, means downloading at about 100 Mbit/s through the VPN, Reelix scanning a new folder and one film playing directly (not converted), all at once. Figures marked measured were read on that computer; the rest are typical for each app.

Library size matters. Reelix and Jellyfin keep more in memory the more films, series and music you have. The measurements of 13 November 2026 were taken on a server with a large library while Reelix was working.

Each install

Converting video comes on top of the figures in At a glance:

Basics Full install Everything
Converting one 1080p film for a phone (Jellyfin) 3 to 4 cores, +1 GB 3 to 4 cores, +1 GB 3 to 4 cores, +1 GB
Tdarr converting the library every core it is given, for hours, +1 to 2 GB every core it is given, for hours, +1 to 2 GB

Each app

App Memory idle Memory at load Processor idle Processor at load
Starboard 20 to 25 MB 37 MB (measured, every page open) about 0 a few seconds for every page
Docker about 80 MB about 100 MB about 0 low
Reelix Lite At rest: 37 MB empty, 80 MB with 257 films and 227 series (measured) While working: 120 to 200 MB scanning a small library (measured); with a large library, as the full Reelix under 1% at rest (measured) 1 core in bursts while scanning
Reelix full At rest: 10 to 30 MB more than Lite While working with a large library: 350 to 380 MB (measured 13 November 2026); 100 to 300 MB more during a YouTube or Spotify download 3 to 18% while working (measured) +1 core while converting a download
Jellyfin Depends on library size: 150 to 300 MB with a small library; 590 to 920 MB with a large one (measured 4 and 13 November 2026), much of it cache 300 to 500 MB more playing directly; +1 GB converting 1 to 3% (measured) almost none playing directly; 3 to 4 cores converting 1080p
Audiobookshelf 80 to 150 MB 150 to 250 MB scanning under 1% 1 core briefly while scanning
Bazarr 120 to 200 MB 200 to 300 MB under 1% short bursts while searching
qBittorrent 15 MB (measured) 50 to 150 MB with active torrents under 1% (measured) 5 to 20% of a core at 100 Mbit/s
NZBGet 20 to 50 MB 50 to 150 MB under 1% 1 to 2 cores briefly, repairing and unpacking
SABnzbd (if chosen) 96 MB (measured) 150 to 300 MB under 1% (measured) 2 to 3 cores briefly, repairing and unpacking
Gluetun (VPN) 37 MB (measured) 40 to 60 MB under 1% (measured) up to 10% of a core at 100 Mbit/s
FlareSolverr 100 to 150 MB +300 to 600 MB for a few seconds under 1% 1 core for a few seconds per site check
Jellystat and its database 150 to 250 MB 250 to 350 MB under 1% low
Wizarr 80 to 120 MB 120 to 150 MB under 1% low
Dispatcharr 250 to 500 MB 400 to 700 MB refreshing guides 1 to 2% 1 core refreshing guides; more if it converts streams
Dozzle 15 to 30 MB 30 to 50 MB with logs open under 1% low
Tdarr 300 to 500 MB +1 to 2 GB converting under 1% every core it is given
Disk health none none none a few seconds every 30 minutes
Kapowarr 80 to 120 MB 120 to 200 MB under 1% low

What you can do with each

Feature Basics Full install Everything
Find, download and sort films and series ✓ ✓ ✓
Books, audiobooks and music, sorted into your library ✓ ✓ ✓
Radio shows and podcasts ✓ ✓ ✓
Requests from the people you share with ✓ ✓ ✓
Download from YouTube and Spotify ✓ ✓
Download torrents through a VPN ✓ ✓ ✓
Download from Usenet ✓ NZBGet ✓ NZBGet, or SABnzbd if you choose ✓ NZBGet, or SABnzbd if you choose
Get past browser checks on some search sites ✓ ✓
Watch films and series on TVs, phones and browsers ✓ ✓ ✓
Listen to audiobooks and podcasts, keeping your place ✓ ✓ ✓
Subtitles found for you ✓ ✓ ✓
Free live TV channels and guides (the Live TV plug-in) ✓ ✓ ✓
Who watched what, and when ✓ ✓
Convert the library to smaller files ✓ ✓
Read every app's log in the browser with Dozzle (System, Logs shows app logs in every install) ✓
A warning before a disk fails (disk health) ✓ ✓
Invite friends and family with a link (Wizarr) ✓
Paid IPTV or full control of channels (Dispatcharr) ✓
Music and books from the Soulseek network ✓
Keep a No-IP address pointing at your server ✓
Comics and graphic novels ✓
Read ebooks, comics and PDFs in the browser (Kavita) ✓
Starboard's dashboard, alerts, download hours, backups and updates ✓ ✓ ✓

Live TV is a plug-in that comes with Starboard, not an app in the install: read Set up free Live TV in Jellyfin.

The apps in each

App What it does Basics Full install Everything Needs
Starboard The dashboard that installs, watches and updates the rest ✓ ✓ ✓ Docker
Reelix Finds, chooses and sorts films, series, books, audiobooks, music and radio; takes requests ✓ Lite ✓ Full ✓ Full A download app
Jellyfin Plays your films, series and music ✓ ✓ ✓
Audiobookshelf Plays audiobooks and podcasts ✓ ✓ ✓
Bazarr Finds subtitles ✓ ✓ ✓ Reelix
qBittorrent Downloads torrents ✓ ✓ ✓
NZBGet Downloads from Usenet; light on memory ✓ ✓ ✓ A Usenet provider
SABnzbd Downloads from Usenet, in place of NZBGet if chosen if chosen A Usenet provider
Gluetun Sends downloads through your VPN ✓ ✓ ✓ A VPN account; a download app
FlareSolverr Gets past browser checks on some search sites ✓ ✓ Reelix
Jellystat Watch statistics for Jellyfin, with its own database ✓ ✓ Jellyfin
Dozzle Reads every app's log in the browser, with no sign-in (System, Logs shows app logs too) ✓
Tdarr Converts the library to smaller files ✓ ✓ Processor time
Disk health Checks each disk every 30 minutes (on the server, not an app) ✓ ✓ The server's password once
Wizarr Invites people to Jellyfin ✓ Jellyfin
Dispatcharr Paid IPTV, backup streams or full control of channels in Jellyfin ✓ Jellyfin
Soulseek (slskd) Music and books from the Soulseek network ✓ A Soulseek name and password
No-IP updater Keeps your No-IP address pointing at the server ✓ A No-IP account
Kapowarr Comics and graphic novels ✓
Read ebooks, comics and PDFs in the browser (Kavita) ✓ A download app
Kavita Reads ebooks, comics and PDFs in the browser or a reading app ✓

An app always brings what it needs: choosing Jellystat also installs Jellyfin, and Reelix installs qBittorrent if there is no download app.

Storyarr was retired on 11 November 2026 and is no longer offered. Reelix does its work: books, audiobooks and radio. An install that has Storyarr keeps it until you take it away in Change your install; read Move your apps to Reelix for what to do with its books.

What you need for each

You need Basics Full install Everything
A computer running Linux Mint 22.3, Debian 13, Ubuntu Server 26.04 or Raspberry Pi OS (read What you need) ✓ ✓ ✓
A folder or disk for your media ✓ ✓ ✓
An account with a VPN provider, for the VPN Recommended Recommended Recommended
An account with a Usenet provider, to download from Usenet Only for Usenet Only for Usenet Only for Usenet
A TMDB API key, free from themoviedb.org Recommended Recommended Recommended
A Spotify account, for Spotify downloads Only for Spotify Only for Spotify
Disk for the apps, before any media about 3.5 GB about 9 GB about 16 GB
  • The VPN is in every install, because it keeps your address private when downloading torrents. Your provider's website gives the details the set-up asks for. You can continue without one and add it later: read Download without a VPN.
  • Usenet needs a paid provider. Without one, NZBGet is installed but has nothing to download from; torrents still work. Read Choose a Usenet provider and add it.
  • TMDB: without a key, Reelix uses open data for films and series (Wikidata and TVmaze), with no film posters. A free key gives the full details and pictures.
  • Disk is the apps as downloaded, measured on a server (NZBGet and Tdarr estimated). The biggest are Dispatcharr (about 4.3 GB), Tdarr (about 2 GB), Jellyfin (1.3 GB) and Jellystat with its database (1.6 GB). The full Reelix takes about 0.7 GB more than Lite (1.1 GB against 0.4 GB).

Things to note

  • Changing later: Settings, Apps, Your install moves between the three either way. Apps taken away keep their settings folders, so adding one back carries on where it left off.
  • Add-ons: any app can be added to any install. Go to System, then Apps, then Install apps, and select Add beside it under 'You can add'.
  • Choose myself: Install apps also lets you tick each group, and with More settings each app.
  • Apps already running on the server are left out of a new install.
  • Converting video (Jellyfin for phones and browsers, or Tdarr) is the heaviest work on any install. With an Intel processor from 2018 or later, Jellyfin uses its video hardware.

Find out more

This page on GitHub, where the help is written.